Tu as raison, un liston bois sera de fil, et le rivet travaillera en arrachement sur de faibles sections. Mauvaise idée.
Va pour sika.
Pour l'instant c'est scotché, il fait trop beau pour perdre du temps avec un liston qui baille
sunfish
-
- Loup de mer mystérieux
- Messages : 875
- Inscription : 23 juin 2009, 12:39
- Localisation : poitiers - la rochelle
Re: sunfish
"There is nothing--absolutely nothing - half so much worth doing as simply messing about in boats."
- Kenneth Grahame, The Wind in the Willows.
- Kenneth Grahame, The Wind in the Willows.
Re: sunfish
c'est exact pour le liston en bois , il se fend et c'est moche ensuite
j'en ai posé sur mon Sail skiff ( merci encore Lasero ) mais je ne l'ai pas gardé ,( le liston ) bien sur a cause des fentes pas jolies , pour l'instant il est sans rien , je pense que je tenterais de refaire tres proprement les angles au mastic epoxi , bien net , bien angulé , pour m'en passer
je precise que mon sail skiff est en cp
j'en ai posé sur mon Sail skiff ( merci encore Lasero ) mais je ne l'ai pas gardé ,( le liston ) bien sur a cause des fentes pas jolies , pour l'instant il est sans rien , je pense que je tenterais de refaire tres proprement les angles au mastic epoxi , bien net , bien angulé , pour m'en passer
je precise que mon sail skiff est en cp
-
- Loup de mer mystérieux
- Messages : 875
- Inscription : 23 juin 2009, 12:39
- Localisation : poitiers - la rochelle
Re: sunfish
mastic epoxy ? Comment tu assures la régularité du joint sur un plan esthétique ? Un coffrage ?
"There is nothing--absolutely nothing - half so much worth doing as simply messing about in boats."
- Kenneth Grahame, The Wind in the Willows.
- Kenneth Grahame, The Wind in the Willows.
-
- Loup de mer mystérieux
- Messages : 875
- Inscription : 23 juin 2009, 12:39
- Localisation : poitiers - la rochelle
Re: sunfish
Retour d'expérience :
J'ai utilisé une colle mastic PU de chez Mr Bricolage (La Sika EST une colle mastic PU !) C'est le même produit deux fois moins cher.
Ca marche du tonnerre, le joint ne bouge plus.
Le sunfish mardi dernier a pris 9 noeuds au travers dans 3 Bf bien établi, et plein de très beaux travers entre 7,5 et 8,5 noeuds.
Pas mal l'ancêtre (je parle du voilier bande de sapajou !)
J'ai utilisé une colle mastic PU de chez Mr Bricolage (La Sika EST une colle mastic PU !) C'est le même produit deux fois moins cher.
Ca marche du tonnerre, le joint ne bouge plus.
Le sunfish mardi dernier a pris 9 noeuds au travers dans 3 Bf bien établi, et plein de très beaux travers entre 7,5 et 8,5 noeuds.
Pas mal l'ancêtre (je parle du voilier bande de sapajou !)
"There is nothing--absolutely nothing - half so much worth doing as simply messing about in boats."
- Kenneth Grahame, The Wind in the Willows.
- Kenneth Grahame, The Wind in the Willows.
https://silk.pl/co-zrobic-z-wlosami-przed-snem-aby-rano-byly-piekniejsze/